Custom Vehicle Wraps & Graphics in Edmonds, WA

A business car does not need vinyl on every panel to be recognized. Door logos, lettering, or well-placed rear graphics can give your brand the visibility it needs, especially when the factory paint supports the design. When you want more coverage, a partial or full vehicle wrap takes the same design further.

We start with where the car is usually seen. A phone number that reads clearly on a parked vehicle can be too small to notice from the next lane, so the key details are sized and placed for how the car is actually used.

If the design includes glass, we review the window graphics and material separately. The layout follows the windows, handles, cameras, and body lines instead of forcing graphics across them.

Work trucks offer good space for a logo and contact details, but that space is rarely uninterrupted. Door gaps, fuel doors, toolboxes, racks, steps, and storage compartments can all split a graphic.

For a commercial fleet, we keep the approved logo, colors, and essential information consistent and adapt the vehicle branding to each truck. One design should not be stretched across every vehicle type.

A partial wrap can give you enough coverage when the truck's existing paint supports the brand. After we review the truck, artwork, and intended use, we can compare it with a full vehicle wrap.

A pickup has several separate surfaces. A graphic that works on the cab door may need a different layout on the bed, and a tailgate design has to work around the handle, camera, trim, and panel shape.

Bed rails, canopies, ladder racks, toolboxes, steps, and aftermarket accessories all change the available space. Clear photographs help our creative team spot those details before the custom wrap is designed.

We start with the truck's paint color and the information your business needs to show. If the existing color supports the brand, a partial wrap or clear door graphics may make more sense than a full vehicle wrap.

A service van gets seen in traffic and again while parked at a customer's property. The business name should read quickly, and services and contact details need a practical spot on the sides or rear.

Sliding doors, handles, windows, cameras, and panel seams shape the graphic. A logo can look right on a flat proof and still split awkwardly when the van door opens, so we solve those problems before printing.

One van or an entire fleet gets the same attention to placement. Approved artwork keeps the brand consistent, but every model still gets its own layout review before the vinyl is produced.

A bus offers a lot of space, but not every panel needs to be filled. Windows, doors, access panels, vents, and curved areas limit where lettering and printed vinyl graphics can go.

Viewing distance changes the design too. Details that look comfortable on a computer screen can disappear once the artwork is enlarged and installed on a bus, so we give the brand name and essential information plenty of room.

Before production, we review the proposed coverage and the areas that must stay visible or accessible. That review shapes the layout, vinyl material, and installation scope.

Trailer panels can look simple on a design template. On the actual trailer, hinges, rivets, seams, latches, reflectors, doors, and trim decide where the graphic can go cleanly.

The sides and rear often do different jobs. A large logo identifies the brand from farther away, while a phone number, website, or service description is meant for someone standing near the parked trailer.

A trailer can carry a full wrap or a partial design. If the existing finish works as the background, logos, vinyl lettering, and selected graphics can make a complete design with less coverage.

Heavy equipment graphics often do a practical job. They identify the company, department, operator, or individual machine without covering most of the equipment.

Texture, existing paint, dirt, wear, high-contact areas, guards, vents, joints, and moving components all affect vinyl material choice and placement. These surfaces need a closer look than a flat van door.

The graphic must leave operational labels and necessary visibility clear. If a proposed spot is likely to interfere with equipment use or take frequent contact, we will recommend a better one.

Car lettering and logos are a practical choice when a business vehicle needs clear identification, on its own or alongside a wrap. Cut vinyl can handle straightforward wording, while printed decals can suit artwork with more colors or detail.

The key decision is what someone should notice first. A logo, list of services, phone number, and website all compete for limited room, so we arrange the information to avoid a business card enlarged across the door.

Send the original logo file if you have it. We check whether it will reproduce cleanly at vehicle size and tell you if the artwork needs adjustment before production.

The trailer’s existing black finish already worked as the background. Instead of recommending a full vehicle wrap automatically, we used that color as part of the design and focused the vinyl coverage on the elements the new brand needed.

Our creative team mocked up the three logo options on the trailer and refined the size, position, colors, and balance. Artwork that looks right by itself can feel too small or too heavy when enlarged across a commercial trailer.

During the design process, the client decided to add a large gray “M” across both sides. We produced it as a second graphic layer, giving the finished vehicle a stronger visual element without covering every exterior panel.

Promo Box designed, printed, and installed the project in-house at the shop. The same brand direction could then be carried into business cards and apparel as the construction company continued developing its identity.

This project was completed in August 2026. It is included as a documented example of Promo Box’s commercial vehicle graphics and trailer wrap services. It is not presented as an Edmonds project.
See the Custom Utility Trailer Graphics project