What is perforated window film?

It is printed vinyl covered in a grid of small holes. From outside, it shows a solid printed graphic, and from inside, you can see out through the holes while daylight still comes in. It turns a plain storefront into a branded display without blacking out the room.

Can people see inside a storefront with perforated film?

During the day, people outside mainly see the printed graphic when the exterior is brighter than the showroom. The film does not guarantee complete privacy in every lighting condition. After dark, interior lighting can make the room visible from outside.

Does perforated film block the natural light inside?

It reduces some natural light, but daylight still enters through the perforations. The exact amount depends on the film. A 60/40 film has about 40% open area, while a 50/50 film has about 50% open area. Opaque vinyl blocks much more light.

How long does storefront window film last?

We used Contra Vision Performance White on Black perforated window film with 40% transparency. Promo Box recommends planning to evaluate or refresh storefront graphics after approximately three years. The manufacturer lists exterior durability of up to five years for this product, while actual service life depends on sun exposure, cleaning, edge condition, installation, and the exact product configuration.

How much does storefront window film cost?

Pricing depends mainly on the total glass area, number of panels, film system, printing, production setup, and installation complexity. Individual window graphics can start at around $300 per window, while complete storefront projects typically start at approximately $1,500. We measure the storefront before confirming the final quote.

Can you see out from inside with perforated film?

Yes. The black interior-facing side makes it easier to see the sidewalk and street through the perforations. During the day, people outside mainly see the printed graphic when the exterior is brighter than the showroom.

Since 2008

Since 2008

soon

Main / Portfolio / Matte Black Paint Protection Film, Window Tint, and a Custom Logo on a Tesla Cybertruck

Matte Black Paint Protection Film, Window Tint, and a Custom Logo on a Tesla Cybertruck

Andrey | 10.29.2026

Client: Alexander S.

Vehicle: Tesla Cybertruck

Service: Full color change with matte black paint protection film, window tint, and logo design and printing

Paint protection film: STEK DYNOblack matte, about 8 mil thermoplastic polyurethane, self-healing, with a water-repellent matte top coat

Window tint: STEK NEX, graphene-enhanced nano-ceramic film, up to 98% infrared heat rejection

Logo: Fear Knot logo, designed by Promo Box, printed on Avery Dennison MPI 1105 and laminated

How the client found us: Referral

Installation time: 2 days

Installed at: Promo Box shop, Everett, WA

Service date: October 2026

Project total: Approximately $6,100 before tax at a discounted rate ($4,750 for the PPF, $600 for the window tint, and $750 for the logo design and graphics). Our standard price for full PPF coverage on a Cybertruck is approximately $6,000.

I've known Alexander for a long time. He knew about our shop for years before he brought us a vehicle, and when he finally did, it was a Cybertruck. He wanted two things. The first was a new color. The second wasn't up for discussion: it had to be paint protection film, not vinyl. He wasn't looking for the cheapest way to make the truck black. He wanted the premium option, and that's what we gave him.

We wrapped the truck in STEK DYNOblack matte paint protection film, tinted the windows with STEK NEX, and designed his logo, which we printed and applied on top. We finished both Cybertrucks that month, and although their black finishes looked similar, the films served different purposes. Alexander's truck had the added protection of polyurethane PPF, while the other Cybertruck received a satin black vinyl color change.

Two Black Cybertrucks, Two Kinds of Protection

That's the point I wanted to make with these two projects. Side by side, the vinyl Cybertruck and the PPF Cybertruck look very close. Both are black, both carry a logo, and both took two days. The difference is what the film does for the paint. Color change vinyl, like the Avery Dennison SW900 on the satin black truck, is about 3 mil thick. It changes the color and provides a basic protective layer over the paint. The polyurethane PPF used on Alexander's truck is approximately 8 mil thick and provides greater protection against minor road debris, stone chips, and surface scratches. Its self-healing properties also allow certain fine scratches and swirl marks to diminish when exposed to heat.

So the real question isn't which one looks better. It's how much protection you want for your budget.

Why STEK

We're certified STEK installers, so we can register the work under STEK's warranty program. That certification is a big reason we use their films on projects like this. STEK films come with the protective top layer built in. DYNOblack matte has a water-repellent matte top coat, so water runs off, and road grime, oils, and water spots don't stick the way they do on bare paint. That's also why we didn't sell Alexander a separate ceramic coating. Some shops will add one anyway. With this film, the protection is already part of the top coat.

The Logo and the Tint

We designed the Fear Knot logo for the truck, printed it on Avery Dennison MPI 1105, our standard cast print vinyl, and laminated it, as we do with every printed graphic. Printed ink needs that laminate. Without it, the ink is exposed to scratches and to solvents like alcohol, which can smear it. The printed branding and diagonal graphics completed the truck's custom look.

While the truck was with us, Alexander also had the windows tinted with STEK NEX. It's a graphene-infused ceramic window film that STEK markets as offering up to 98% infrared heat rejection, depending on the specific film. Cybertruck glass isn't standard, but the windows are flat and rectangular, so the tint went on without surprises.

What Alexander Got

Alexander now has a matte black Cybertruck wrapped in self-healing STEK DYNOblack paint protection film, STEK NEX window tint with up to 98% infrared heat rejection, and the Fear Knot logo printed and laminated on top. The work took two days. He's a longtime friend of the shop, so we gave him a discounted rate on the PPF. We charged $4,750 for the PPF, $600 for the window tint, and approximately $750 for the logo design and graphics, bringing the project total to about $6,100 before tax. At our standard rate, PPF alone on a Cybertruck runs about $6,000. His truck also went home with our care tag on the mirror. It covers the first 48 hours, washing, pressure washer tips, and long-term care, and it ends with a tear-off referral coupon.

These two trucks answer a question we hear all the time: vinyl or PPF? Both will make a Cybertruck black, and both can carry a logo. One primarily changes the color. The other changes the color while providing greater protection against everyday wear. Alexander knew exactly which one he wanted, and he was very happy with the result.